Features: Charge control
Simply connect the vehicle to the charging station: charging can start without specific action.
Charging can be stopped and then restarted using the Stop/Start button.
The charging power can be limited by any energy management device providing that this device is able to close a potential-free contact wired to the Wallbox.
Characteristics of the power supply network
220-240 V single-phase – 50/60 Hz for 3.7 and 7.4 kW charging stations
380-415 V three-phase – 50/60 Hz for 11 and 22 kW charging stations
Earthing system: TT, TN or IT
Mechanical and environmental characteristics
Ingress protection code: IP54
Impact protection code: IK10
Operating temperature: -30°C to +50°C
Storage temperature: -40°C to +80°C
Attached cable length: 4 m
Energy management: deferred charging start or charging current limitation (16 A to 10 A, 32 A to 16 A)
By key lock
24 months for the entire EVlink range
Range of 14 charging stations:
Rated charging power: 3.7, 7.4, 11 or 22 kW
T2 Socket outlet with or without shutter or attached cable with T1 or T2 connector
High robustness of socket outlet (Type 2 or Type 2 with shutters) thanks to silver plated contact avoiding overheat
QR code App registration for easy installation tracking.
High protection against mechanical impacts: IK10
Suitable for outdoor use: IP54
Easy to use
‘Plug & charge’
The enclosure serves as a hanger for the attached cable
Technical documentation: installation sheet and quick start guide in different languages.
Energy management option
Delayed start allows only charging during off-peak hours or temporary current limitation (from 16 A to 10 A or from 32 A to 16 A) to reduce the overall building consumption.
The option can be activated through an external contact hard-wired to the station.
EVlink Wallbox charging stations can be used at home (individual house or condominium), as well as in private and semi-public car parks (public covered car parks, corporate car parks, hotel …)